Manfrotto MT055CXPRO4 Review

The MT055CXPRO4 is the top of the line tripod that Manfrotto sells for still photography.  It comes with every bell and whistle that Manfrotto can think of.  Manfrotto has long been an innovator and leader in the midrange tripod space, and they continue to show that heritage here.  The new flip locks, leg angle selectors, and horizontal center column create a tripod that is truly distinct from the rest of the market.


This is an abbreviated list.  The full measured specs can be found here.

Weight4.45 lbs (2.019 kgs)
Maximum Height55.2 in (140.2 cm)
Minimum Height11.5 in (29.2 cm)
Max Height with Center Column66.4 in (168.7 cm)
Folded Length21.0 in (53.3 cm)
Folded Volume241.0 cu. in. (3.9 liters)
Leg MaterialCarbon Fiber
Leg Sections4
Primary Leg Angle25.0 deg
Leg LocksFlip
Exchangeable FeetNo
Foot TypeRubber
Bottom HookNo
Retail Price$380

The height and weight of the MT055 place it firmly in the “All Purpose” category of tripods.  These are too big for convenient travel, but are perfectly capable of being a workhorse in many situations.  All three of the MT055 tripods reach nearly the same height, but the CXPRO4 version is more than a pound lighter than the aluminum XPRO3 and several ounces heavier than the three section CXPRO3.  The MT055 is still more than half a pound heavier than similar high end tripods in its class, but also less than half the price.  The primary advantage of the four section version is that it folds up to be roughly four inches shorter.


The big feature on the MT055 is the horizontal center column.  Manfrotto has long been a pioneer integrating a horizontal center column into the tripod.  This is easily the best implementation yet.  To set it up, one simply unlocks the center column as normal, presses a button on the bottom of the center column, and raises it all the way through the apex, which pulls up the red clamp.  The center column is rotated horizontally and then tightened down with the same center column lock knob.  The whole process takes about ten seconds, and is really slick and intuitive.

The MT055 also has a 3/8″ accessory port built into the apex which Manfrotto has named “Easylink”.  These are becoming more common on tripods and allow the user to screw in a wide array of different accessories such as lighting or video monitors.  While it is standard on most high end tripods, the 190go! is the only travel tripod I have seen at this price point that includes one.

The MT055 tripods omit replaceable feet for a simple rubber bumper at the bottom of each leg.  This is an acceptable design choice for a mid range tripod.  It saves weight and cost while providing a solution that is optimal 90% of the time.  The rubber feet will work very competently on soft ground or sand, where one might have wanted spikes, and also on hard level ground where the rotating platform style feet are preferred.  The only place you might get in trouble is on powder snow where snowshoes are critical.


The MT055 tripods feature Manfrotto’s unique method of leg angle selection.  Instead of the traditional pull out tab, one pulls down on a tab on the outside of the top of each leg section.  This disengages a ratchet mechanism on the bottom side of the apex piece, and allows the leg angle to be adjusted.  This is a slick system, and allows for slightly faster leg angle adjustments than the traditional design.

Manfrotto has traditionally stuck with flip locks for the legs on its tripods, and the MT055 is no exception.  It features the newest generation called “Quick Power Lock”.  The locks are indeed very quick to use, much quicker than your typical twist locks.  There was no apparent loss of stability due to these leg locks, so overall I consider them a win.  The only downside I experienced was once when the lock pinched the skin of my hand upon the spring assisted opening.  Ouch.

A complaint of mine about the construction of the MT055 is common to the entire line of Manfrottos.  The top sections of each leg, that attaches to the apex, is so bulky that the legs do not make contact with the center column when the tripod is folded up.  There is a gap that the legs flex into when the tripod is picked up and given a gentle squeeze.  This really does not impact performance in any meaningful way, but does not endow the feeling of solidness when handling the tripod.  It also makes the whole package bulkier than it really needs to be.  This gap is partly due to the design constraints required by the fast setup horizontal center column, and cannot be eliminated in the traditional way by placing a rubber bumper around the base of the center column.  My suggestion for Manfrotto is to trim down the size of the top section of each leg, and then place the rubber bumper on the inside of each leg.  This will allow the tripod to fold up in a more solid fashion.

Build Quality

The build quality of the Manfrotto tripods is typically excellent for the price, and the MT055 is no exception.  The metal parts of the MT055 are cast aluminum and feel solid.  The same bulkiness that causes problems when the tripod is folded up lends to a feeling of durability about the apex.  The metal parts don’t have the same high level of fit and finish typically seen on CNC machined tripods, but those tripods are typically many times the price.  The center column lock knob is plastic, but this never caused a problem.  There is nothing wrong with the MT055 build quality, as long as you aren’t expecting it to be at the same level as a top of the line tripod.

Test Results

The full test data can be found here.  The table below summarizes the results.

Yaw Stiffness609 +/- 2 Nm/rad
Yaw Damping0.365 +/- 0.037 Js/rad
Pitch Stiffness2270 +/- 9 Nm/rad
Pitch Damping0.346 +/- 0.035 Js/rad

The stiffness of the MT055CXPRO4 is good for the price.  However, it is significantly less stiff than its three section sibling, and slightly more stiff than the aluminum version.  This is expected.  Carbon fiber and fewer leg sections both contribute to increased stiffness.  Manfrotto is clearly using a higher quality carbon fiber than is typically seen in the low end tripods.



  • Excellent build quality
  • Best built in horizontal center column mechanism ever made
  • Fast action flip locks
  • Fast leg angle release mechanism


  • Heavy
  • Bulky
  • Air gap between the legs when folded
  • Feet are not replaceable

The Manfrotto MT055CXPRO4 is for you if you are looking for a stiff, well built, feature rich tripod on a budget, and you are okay with some extra weight and bulk.  Weight and bulk are the typical compromises for price and stiffness, but the MT055CXPRO4 does better than most.  Given that the CXPRO4 version is slightly heavier and less stiff than the CXPRO3, three section version, you should only consider the CXPRO4 if the folded length is a very important consideration.